ABOUT MICROCEMENT
Cemher microcement is a premium, coating system designed for a wide range of surfaces, including walls, floors, ceilings, furniture, wet rooms and pools. It’s known for its exceptional waterproofing, crack resistance, stain resistance, with low VOC emissions, making it the premium choice for both interior and exterior applications.
Premium Architectural, High Performance Coatings.
After over two decades in the coatings industry as Australian installers, we grew frustrated with previous microcement and venetian plaster products that consistently failed to meet expectations. Other distributors consistently overpromise and underdeliver, supplying materials that fail to meet expected standards.
-
Driven by a passion for excellence, we embarked on a two-year journey, testing microcement from global manufacturers. Our rigorous Stage 1 testing included resistance to fire, staining, and chemicals, followed by assessments of mechanical adhesion, waterproofing, flexibility, and compressive strength. Cemher emerged as the clear superior choice across all categories, giving us the confidence to offer Australia’s best coating solution.
Cemher is the exclusive Australian distributor of Cemher materials, working closely with our manufacturer in Spain. Our sole location is on the Gold Coast, Queensland. We’ve recently discovered copycat websites attempting to mimic our brand and sell counterfeit materials. To ensure you're receiving authentic Cemher products, please connect with us through our official channels listed below:
- Phone: 1300 886 825
- Address: 5/23 Ford Road, Coomera, Gold Coast QLD Australia 4209
- Website: Cemher.com.au
Our dedicated team is here to assist you with any inquiries.
Where We Outcompete In The Market
- Higher Compressive Strength
- Highest Impact resistance
- Highest Stain Resistance
- Waterproof Before Sealers (Only completelty waterproof microcement in Aus)
- Interior & Exterior Use
- Aesthtics: Tonal Variation and Texture
- Highest Warranties 10 years
- No need to constantly reseal like other brands
- Preferred by High End Builders, Architects & Designers Globally
- Trusted in over 40 countries
- LAb Tested To Both Australian & European Standard
- 600+ Trained installers Across Australia
- Stunning Colour Range & Sample Packs
Cemher Microcement outcompete all other brands in all test categories including compressive strength, flexibility, waterproofing, aesthetics, stain resistance and more.
-
Cemher microcement is a trusted brand in over 40 countries, renowned for its superior waterproofing in every layer and its flexibility. These qualities make it the most reliable choice for diverse environments and applications.
Yes, Cemher microcement is the ONLY 100% waterproof at every layer, even before the final sealing process. This makes it the only choice for moisture-prone areas like bathrooms, kitchens, sinks and externals.
Cemher Microcement offers superior durability and waterproofing compared to Venetian plaster, which can crack over time. Unlike Venetian plaster, Cemher Microcement is flexible, adapting to structural movement without compromising integrity. Our MicroDur, showcased at our HQ, exemplifies this strength and elegance. For more inspiration, explore the stunning MicroDur images in our Cemher VOL III brochure.
Microcement offers greater flexibility and allows for more precise control over the colour, tone, texture, and overall aesthetics of a surface compared to polished concrete. This versatility makes it a preferred choice for achieving customised finishes with tonal variations that flow seamless with a stunning minimalist aesthetic.
Yes, we offer a 10-year product warranty to applicators who are part of the Cemher Pro program, providing peace of mind and assurance of product quality. Furthermore, the installer should offer a workmanship warranty also.
Yes, all Cemher microcement products are engineered to be slip-resistant when applied according to the installation guidelines, achieving a P4 or P5 rating depending on the system used. This ensures they are a safe and reliable choice for both residential and commercial spaces.
Yes, Cemher microcement features the highest stain-resistant sealers available in Australia. Our exceptional performance is so sought after that other microcement distributors have requested to purchase our sealers for use with their systems - requests we’ve declined to maintain our products exclusive quality.
-
This advanced protection keeps surfaces pristine and easy to maintain, ensuring long-lasting beauty and durability in any setting.
Yes, Cemher microcement is designed with low VOC emissions, ensuring A+ air quality. A significant advantage is its 0% respirable silica content, in stark contrast to competitor brands with over 65%.
-
This commitment to sustainability not only makes Cemher a safer choice for your environment but also creates healthier spaces for you and your family.
AREAS & Substrate
Cemher microcement is highly adaptable and can be applied to a wide variety of substrates, including tiles, MDF, concrete, render, fiber cement, plywood, and more. For best results, refer to specific product details to match the product to your project needs.
MicroDur and MicrOne are both suitable for indoor applications for both floors and walls.
MicrOne is the best choice for bathrooms and wet areas as it is completely waterproof in every layer. Microne does not rely on sealers for waterproofing like other brands
-
Purchase MicrOne DIY Kit Here
" MICRONE 10m2 Kit "
MicrOne and MicroPool are both great options for external use as they are both 100% waterproof in every layer and do not rely on sealers alone for waterproofing.
MicroDur is, in our opinion, the finest wall coating on the market, versatile enough for use on floors as well. When paired, they create a seamless transition from wall to floor, and even ceilings, offering a cohesive and elegant design throughout any space. MicroDur's stunning tonal variations and textures lend a sophisticated matte, earthy finish.
-
For a more minimal aesthetic, MicrOne offers subtle tonal variation and rich textures, suitable for floors, walls, benchtops, and wet areas.
-
Explore our MicroDur and MicrOne pages and brochures for inspiration.
Yes, underfloor or radiant heating can be installed with our MicroDur system. If you wish to use the MicrOne system over underfloor heating, you must first apply a MicroDur Base to ensure proper installation and performance.
Installation
No, we do not provide installation services ourselves. As a company, our focus is on developing high-quality microcement products and delivering the best solutions for our clients.
-
However, if you need a contractor, we can recommend trusted microcement installers, we collaborate with over 600 trained businesses using Cemher. See link below to our find an installer page.
-
The installation of Cemher microcement typically takes between 3 for wall finishes and up t to 6+ days, depending on the size and complexity of the project. This timeframe ensures a thorough and precise application.
Our complete system from priming to sealing is approximately 3-5mm in thickness.
After the microcement has cured, we recommend allowing only light foot traffic for the first 14 days to ensure the surface settles properly and achieves its full strength. This precaution helps to preserve the finish and prevent any potential damage during the initial curing phase.
-
However, If trades need to access the area the floor can be covered after 3 days and lightly walked over to continue fit off, etc.
MICRODUR
Internals, Floors, Walls & Ceilings, Furniture & Benchtops (Non-Wet Areas)
MicroDur is Waterproof once sealed. For complete waterproof in Mass systems prior to sealer, refer to Cemher MicrOne.
We've often heard that our MicroDur surpasses the aesthetic appeal of Venetian plaster. It offers a rich, earthy texture with stunning tonal variations that bring warmth and character to any space.
-
The unique look and feel of MicroDur can be fully appreciated on large-scale floors and walls in our Gold Coast Display Office.
MicroDur has its own core colour range that suit Australia's minimalist earthy tones and textures. We can also custom colour match using our commercial grade tint machines to suit your space.
microne
- Internals
- Externals
- Bathrooms
- Wet Areas
- Floors
- Walls
- Ceilings
- Furniture
- Benchtops
- Textured.
MicrOnel is completely waterproof in every layer before any sealer is applied. The only completely waterproof microcement available in Australia.
MicrOne has its own core colour range that suit Australia's minimalist earthy tones and textures. We can also custom colour match using our commercial grade tint machines.
MICROPOOL
- Pools
- Spas
- Patios
- External Floors
MicroPool is completely waterproof in every layer before any sealer is applied.
MicroPool is chlorine and chemical resistant and guaranteed 100% waterproof when installed in accordance with the installation and substrate guides.
MicroPool has its own core colour range that suit Australia's minimalist earthy tones and textures.
Clay Paint
Clay Wash is a natural and organic alternative to conventional interior paints. Composed primarily of clay with a touch of lime, it offers a highly decorative, eco-friendly wall coating that adds unique character to any space.
Using a block brush, apply in random directions in a criss cross infinity pattern to create large cloudy variations.
We can custom-create Clay Wash colours to perfectly match your design, or we can align them with the Microcement colours from our range. This ensures a seamless flow between all coatings and textures throughout your project.
Clay Wash is easy to apply, requiring no prior experience, making it perfect for those who enjoy hands-on projects. You'll be amazed at the results - stunning velvety matte clay surfaces that bring a sophisticated and natural elegance to your space.
Yes, Clay Wash is available to purchase for renovators and DIY enthusiasts due to it's ease of application.
Clay Stone
Clay Stone, a stunning raw and highly decorative coating for internal walls. As a superior choice over traditional Venetian plasters, Clay Stone offers a more eco-friendly option without compromising on elegance. This versatile finish can be built up to create rich textures, resulting in a naturally cloudy and sophisticated appearance that enhances any interior space.
Applied in two coats over interior walls using a trowel, Clay Wash offers flexibility in texture. You can smooth it for a sleek finish or build it up for a more textured, dimensional effect, allowing you to customise the look to suit your space.
MicroDur and Clay Stone both offer unique finishes for interior surfaces
- MicroDur: A premium microcement coating known for its versatility, MicroDur can be used on both walls and floors, offering a seamless flow throughout spaces. It features stunning tonal variations and textures, creating an elegant, matte, earthy feel.
- Clay Stone: A natural, clay-based coating with added lime. It delivers a soft, velvety matte texture and is used for internal walls and ceilings, imparting character and warmth to interiors.
Yes, Clay Stone is available to purchase for renovators and DIY enthusiasts due to it's ease of application.
DIY MICROCEMENT KIT
MicrOne is our flagship 10m² DIY Microcement Kit, trusted by both professional installers and DIY enthusiasts.
-
This pre-mixed product allows you to work at your own pace - simply close the bucket and continue when ready, without worrying about rushing the process. MicrOne provides a seamless, high-quality finish that's easy to apply, making it the ideal choice for anyone looking to achieve a professional-grade result in their renovations.
-
Our Cemher MicrOne kit is the only fully waterproof microcement in Australia, ensuring complete protection and longevity, no matter how it's installed or how much sealer is applied.
-
Its simplicity makes it perfect for a wide range of applications, from bathrooms and wet areas to internal and external walls and floors, benchtops, joinery, furniture, and more. With its stunning finish and versatile use, MicrOne elevates any space with ease.
-
Each kit includes a step-by-step installation video, making the process simple and accessible for everyone. Don't compromise on quality—choose MicrOne for your investment.
- Internals
- Externals
- Bathrooms
- Wet Areas
- Floors
- Walls
- Ceilings
- Furniture
- Benchtops
- Textured.
The Cemher DIY Kit for 10m² includes everything you need to install.
- Primer
- Base Coats
- Top Coats
- Tint
- Sealers
- Step-by-step installation guide (PDF and video).
You will also need to add on a Fibreglass Mesh roll, Scraper and Trowel from the Cemher Shop
Absolutely! We have over 600 installers Australia Wide who have access to our complete range of systems, including Pool installations. See our "Find An Installer" page for more details.
We send Cemher Microcement all across Australia. We have a 48 hour processing time, after this you will receive an expressing shipping tracking number.
You will receive both a PDF Installation guide and a Step-By-Step Installation Video to follow to ensure quality application.
Maintenance & Cleaning
Cemher cleaner has been formulated to best suit the product. However, any PH Neutral cleaner is suitable.
Treat your Microcement surfaces with care just like you would any tile, stone, timber, etc and clean when you desire. Microcement require little to no maintenance.
Unlike many other microcement that require sealing every 12 - 24 months. Cemher doesn't require resealing for 10 years due to it's impermeability.